Experience of the Satisfying Smoke V6 System

The V6 variable voltage electronic cigarette has a regulated output voltage which keeps your selected voltage the same with each puff regardless of your remaining battery power. As the battery drains, the V6 ecig will keep the voltage consistent giving you the perfect vapor throughout the day.

 

Assemble the V6 device:

To assembly your device, install the 2 original batteries into the body tube, screw bottom cap firmly. Gently screw atomizer into body. Make sure drip tip is fixed well too. To feel the amazing vapor and prevent damage, do not use low resistance for the 5V or 6V status, the original clearomizer is comfortable to all 3 settings.

 

Refill the CE5 tank:

  1. Remove the drip tip and unscrew the top cap of the clearomizer.
  2. Drop liquid inside the tank of the clearomizer, between the outside tube and the outside tube. Do not overfill, holds approximately 3.5ml.
  3. Gently screw the top cap on then attach the drip tip well.

 

Battery and charger:

Our V6 uses two AW 16340 3.7 volt 750mah rechargeable batteries. Inside them is a microchip to prevent batteries from overcharging. To change the battery, take out the batteries from the V6 body, put them into the travel charger that comes with the V6 kit. Pay attention to the positive & negative poles. LED indicator is red when it is charging and goes out when it is full charged. Make sure the batteries are full charged before using.Use Satisfying Smoke original equipment batteries only.

 

How to adjust vapor volume:

  1. By default, the battery is at low voltage status when you get it, the indicator LED ring is red, and thus vapor volume is the lowest when you smoke it.
  2. Based on the status of low voltage, press 5 clicks to half red and half blue. Now the battery is in medium voltage status, vapor volume will increase.
  3. Based on the medium voltage, 5 clicks again will change the LED ring to blue. Now the voltage is at high voltage status. Vapor volume will reach a maximum.
  4. Same procedure will lower voltage one step at a time. Blue = 6 volt, Red & Blue = 5 volt, and Red = 4 volt.

 

V6 advantages:

  1. The circuit board inside the battery enhances the short circuit protection; if the batteries are installed incorrectly it will not harm the batteries.
  2. If the V6 switch is activated for 10 seconds, the unit will auto shutdown to prevent overheating or damage to the atomizer.
  3. The device will monitor the battery voltage and automatically turn off when the battery is discharged.
  4. The V6 battery body tube is made of copper, and can be damage if dropped.

 

Maintenance:

To keep your V6 functioning properly, use only as directed and follow the guidelines in your manual. Clean and maintain your unit regularly. Do not allow dust to accumulate in the atomizer or battery compartment. Cleaning the screw threads will ensure maximum electric conduction. Use clear alcohol to wipe the threads of the atomizer and battery body with tissue or cotton swab. Allow to dry thoroughly before use.

 

Warranty:

180 days warranty on our V6 kit from date of purchase, we do not warrant damage due to client misuse & fault or unreasonable usage. The use of batteries other then the original Satisfying Smoke will void the warranty.

 

V6 advantages:

1. The circuit board inside the battery enhances the short circuit protection; if the batteries are installed incorrectly it will not harm the batteries.

2. If the V6 switch is activated for 10 seconds, the unit will auto shutdown to prevent overheating or damage to the atomizer.

3. The device will monitor the battery voltage and automatically turn off when the battery is discharged.

4. The V6 battery body tube is made of copper, and can be damage if dropped.

 

Maintenance:

To keep your V6 functioning properly, use only as directed and follow the guidelines in your manual. Clean and maintain your unit regularly. Do not allow dust to accumulate in the atomizer or battery compartment. Cleaning the screw threads will ensure maximum electric conduction. Use clear alcohol to wipe the threads of the atomizer and battery body with tissue or cotton swab. Allow to dry thoroughly before use.